Lenze EtherCAT Controller-based Automation Manuel d'utilisateur télécharger pdf (Page 39)

Lenze · Controller-based Automation · EtherCAT® Communication Manual · DMS 6.4 EN · 04/2014 · TD17 39

7 Commissioning of the system

7.1 Sample projects (Application Samples)

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

7 Commissioning of the system

This chapter provides information on how to commission the Lenze automation system with

EtherCAT.

Depending on the field devices used, the following Lenze Engineering tools

( 29) are required:

• »EASY Starter«

• »Engineer«

•»PLC Designer«

7.1 Sample projects (Application Samples)

There already exist sample projects (device application + PLC program) for commissioning of Lenze

inverters.

The Lenze sample projects can be found in the MS Windows start menu under:

Start  All programs  Lenze  AppSamples  ...

The Lenze sample projects can also be opened in the »PLC Designer« via the menu command File 

New project..., or using <Ctrl>+<N>.

 Detailed information on the sample projects can be found in the following

documentation:

• SW_ApplicationSample_i700_(PLC Designer V3)_Vx-y_DE/EN.pdf

• SW_ApplicationSamples_(Controller-based)_Vx-y_DE/EN.pdf

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 204 205

Pas de commentaire

Lenze EtherCAT Controller-based Automation Manuel d'utilisateur Page 39