Lenze PLC Designer R3-x Manuel d'utilisateur télécharger pdf (Page 14)

Preconditions

System requirements

Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

3 Preconditions

3.1 System requirements

[3-1] Illustration example: System structure with a Controller 3200 C

3.2 What is the PLC Designer?

The »PLC Designer« is a Lenze engineering tool for programming the PLC of Lenze Controllers. The

Controller is the central control component of the Lenze Controller-based Automation system.

Product features

• Five different editors for the programming languages standardised in the IEC 61131-3 and a

very efficient CFC Editor are available. They can be used to create your own programs or to

address the functions of the Logic & Motion runtime software.

• By means of the integrated visualisation the processes are shown, in order to obtain all

important pieces of information at a glance during commissioning.

Engineering PC Controller

Hardware PC/notebook PLC (Logic) from firmware V3.1

Operating system Windows XP Windows CE

Required Lenze software »PLC Designer« V3.1 Logic

Further requirements Depending on the respective sample

application:

• CAN or EtherCAT bus system

• CAN or EtherCAT node

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 158 159

Pas de commentaire

Lenze PLC Designer R3-x Manuel d'utilisateur Page 14