Lenze PLC Designer PLC Designer (R2-x) Manuel d'utilisateur télécharger pdf (Page 772)

100

101

L-force | PLC Designer

PLC Designer Visualization

770 DMS 3.2 EN 02/2011 TD29 

Category Time/Date: Here you can define in which format the date or time data

outputs in a visualization should be displayed.

If option Formatted time display is activated, outputs controlled by a variable of the

corresponding time or date datatype (e.g. timevar:TIME;) will be displayed in that

format which is defined in the respective edit field here in the dialog. If the option is

not activated or if for a datatype no formatting is defined here, the output will be

displayed in that format which is used when assigning values to date and time

constants (e.g. "t#12h34m15s").

 Note!

During compilation as Target-Visualization a warning will be displayed, if the

functionality is not supported by the target system.

Settings for the following datatypes are possible: Format for TIME/TOD, Format for

DATE, Format for DT.

You can use the formattings listed in the table stated below. Upper and lower case

must be regarded. Empty spaces inserted in a formatting definition will be displayed

in the output string at the same position. Additional characters, which should not be

interpreted as format definition, must be embraced by single quotation marks.

Example:

You have defined a project variable "timevar" of data type TIME, which is configured

to control the text output of a visualization element. If in the Time/Date settings of

this visualization, in the edit field at "Format for TIME/TOD", you enter the following:

hh':'mm':'ss tt, then in online mode - e.g. if timevar has the value "t#12h34m15s" - the

output by the respective visualization element will look like follows: 12:24:15 PM.

1 2 ... 767 768 769 770 771 772 773 774 775 776 777 ... 843 844

Lenze PLC Designer PLC Designer (R2-x) Manuel d'utilisateur Page 772

Commentaires sur ces manuels

Lenze PLC Designer PLC Designer (R2-x) Manuel d'utilisateur Page 772

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Lenze PLC Designer PLC Designer (R2-x)