Lenze PLC Designer PLC Designer (R2-x) Manuel d'utilisateur télécharger pdf (Page 367)

100

101

L-force | PLC Designer

The Resources

 DMS 3.2 EN 02/2011 TD29 365

DP parameters of a DP slave

This dialog shows the following parameters extracted from the device file of the DP

slave (The dialog might have a different title, which is defined in the configuration

file):

DP parameters dialog for a DP slave

Info Manufacturer, GSD Revision, HW Release and SW Release (hard- and

software version), GSD-Filename, Slavetype

Standard parameter Identnumber: Unique ident number assigned by the PNO for this device

type. Allows unambiguous reference between a DP slave and the

corresponding GSD-file.

TSDR (Tbit*): Time Station Delay Responder: Reaction time, the earliest

time after which the slave is permitted to respond to the master. (min. 11

TBit)

* TBit: Time unit for transfer of a bit on the PROFIBUS; Reciprocal value of

the transmission rate; e.g. 1 TBit at 12MBaud=1/12.000.000 Bit/sec=83ns

Lock/Unlock: Slave is locked or released to other masters:

0: min.TSDR and slave-specific parameters may be overwritten

1: Slave released to other masters,

2: Slave locked to other masters, all parameters are accepted;

3: Slave released to other masters

1 2 ... 362 363 364 365 366 367 368 369 370 371 372 ... 843 844

Commentaires sur ces manuels

Pas de commentaire

Lenze PLC Designer PLC Designer (R2-x) Manuel d'utilisateur Page 367

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Lenze PLC Designer PLC Designer (R2-x)