Lenze PLC Designer PLC Designer (R2-x) Manuel d'utilisateur télécharger pdf (Page 742)

L-force | PLC Designer

PLC Designer Visualization

740 DMS 3.2 EN 02/2011 TD29 

20.6.22 Meter

Dialog for the configuration of a Meter element

This dialog will open automatically as soon as you insert a Meter into a visualization

object. A Preview is part of the dialog, immediately showing how the element will

look as a result of the currently set parameters:

Arrowtype: Define the type of the arrow which will point at the current value on the

Meter. Possible types: Normal arrow, Thin arrow, Wide arrow, Thin needle.

Arrow start, Arrow end: Here you define the start and the end positions of the scale on

a virtual circular arc in ° Degrees (angle). (Example: a Start angle of 180° and an End

angle of 0° will define a upturned semicircle).

Arrow color: This button opens the standard dialog or a target-specific color selection

list for choosing a color. Define the color of the pointer.

Pas de commentaire

Lenze PLC Designer PLC Designer (R2-x) Manuel d'utilisateur Page 742