Lenze PLC Designer PLC Designer (R2-x) Manuel d'utilisateur télécharger pdf (Page 26)

100

101

L-force | PLC Designer

Lenze specifications

24 DMS 3.2 EN 02/2011 TD29 

2.1.2 Updating the Lenze target "V5 Logic with Motion" to "V6 Logic with Motion"

Step V5 Logic with Motion-> V6 Logic V5 Logic with Motion- > V6 Logic with Motion

1 Do not convert, as Motion components are lost

during conversion to the Logic target!

Open org. V5 project

Set "Save configuration files in project“

option

Save project

Select the V6 target under Target system

settings Ω Configuration

Add the following function libraries in the

Library manager to the project:

3S_CANOpenMaster.lib

SM_CANWatch.lib

SM_CAN.lib und

LenzeCANdrive.lib

Remove

the\Motion\Drives\CAN\3S_CanDrv.lib

function library from the project in the Library

manager

Add the 3S_CanDrv.lib function library to the

project in the Library manager

Save and close project

Open project

Translate project completely

Possibly incompatibilities are caused by new

lib versions which then have to be

individually edited manually.

Example: In contrast to the version from the

V5 target, the SMC_Interpolator FB from the

V6 target has two basic inputs.

2.1.3 Updating the Lenze target "V6 Logic" to "V6 Logic with Motion"

Step V6 Logic -> V6 Logic with Motion

1 Open org. V6 Logic project

Select the V6 Logic + Motion Target under Target system settings Ω Configuration

3 Translate project completely

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 843 844

Commentaires sur ces manuels

Pas de commentaire

Lenze PLC Designer PLC Designer (R2-x) Manuel d'utilisateur Page 26

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Lenze PLC Designer PLC Designer (R2-x)