Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Manuel d'utilisateur télécharger pdf (Page 41)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013 41

Working with the ApplicationTemplate

Mapping the actual machine structure in the »PLC Designer«

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

2. Add an EtherCAT slave below the EtherCAT Master: Right-click the EtherCAT Master

Add device:

Select the desired device from the selection list .

The »PLC Designer« provides a "fieldbus scan" during which the devices connected to the

fieldbus are automatically detected.

Further information is provided in the "Controller-based Automation EtherCAT" section of

the online help for the »PLC Designer« and in the Controller-based Automation EtherCAT

communication manual (KHB).

Repeat the Add device until all slaves connected to the fieldbus are implemented in the

device view.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 176 177

Pas de commentaire

Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Manuel d'utilisateur Page 41