Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Manuel d'utilisateur télécharger pdf (Page 165)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013 165

Application example: Flying saw

Application example: Extending the visualization

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Note: The sequence of the visualizations in Vis_eFrame must correspond to the sequence

in the frame selection (cp. step 2).

5. Add the button for calling the module visualization.

• Double-click and open: A11_Visualisation\SubVisu Keys_Main

• Add another button below the Machine Control button.

• Name the new button according to the previously assigned module names, example of

first button: Infeed.

Configuring the button: Change of colour on mouse-up / mouse-down

 How to proceed:

1. Select the Infeed button by clicking the visualisation page.

2. Go to the Properties dialog box and click Configure in the Input configuration area to

configure the behaviour for OnMouseUp:

3. Go to the Input configuration dialog box and insert Execute ST code above the arrow

buttons.

4. Enter the structured text (ST) in the text field which is to be executed for OnMouseUp. Enter

the following value:

MM_Vis.scVisuIntern.diFrame :=Vis_eFrame.MVis_Infeed;

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 176 177

Pas de commentaire

Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Manuel d'utilisateur Page 165