Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Manuel d'utilisateur télécharger pdf (Page 44)

Working with the ApplicationTemplate

Mapping the actual machine structure in the »PLC Designer«

Lenze · ApplicationTemplate · 1.3 EN - 04/2013

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

2. Set the baud rate via the CANbus tab.

Note: The value of the transfer rate set in the »PLC Designer« overwrites any existing

transfer values of the devices (set via »WebConfig«/»Engineer«).

3. In a CANopen network, set the same baud rate for all nodes.

4. Use the Add Device command to extend the control configuration by "CANopen

Manager".

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 176 177

Pas de commentaire

Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Manuel d'utilisateur Page 44