Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Manuel d'utilisateur télécharger pdf (Page 167)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013 167

Application example: Flying saw

State machine

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

• Go to the Tools dialog box and select the Common Controls section. Insert the buttons

into the visualization interface:

3. Assign the variables.

Go to the Properties dialog box and select the Input configuration\Tab\Variable. Assign the

previously created xReady variable.

•Structure MVis_scA01_MachineControl

•Location: Folder A55_VarLists\MM_Vis

4. Go to the Properties dialog box and click Configure in the Input configuration area to

configure the behaviour for OnMouseUp:

5. Go to the Properties area under Color Variables and assign the variable from the

MVis_scA01_MachineControl structure to the button for toggle color:

6. Supplement the program line in the S02_Ready action in the Machine Control control

module:

Steps 3 to 6 must be performed correspondingly for the Manual button.

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 176 177

Pas de commentaire

Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Manuel d'utilisateur Page 167