Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37 Manuel d'utilisateur Page 265

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 679
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 264
L Firmware 1.37 - 09/2006 265
9400 HighLine | Parameter setting & configuration
Standard TAs
TA "Actuator – torque"
11.3 TA "Actuator – torque"
When the technology application "actuator – torque" is used the drive creates a torque to
be specified independent of the motor speed. A superimposed speed limitation prevents
the drive from accelerating in an uncontrolled mode. The torque setpoint and torque limit
value are the main setpoint values of the application.
r The setpoint of the motor torque can be specified for both directions. The drive
accordingly acts in a driving or braking way. With a unipolar setpoint the effective
direction can be changed via the digital input DI3.
r After the enable of the torque-controlled operation via the digital input DI2 the
creation of the torque is controlled via a ramp generator starting from the current
torque.
r The torque limit value to be specified refers to the freely setting direction of rotation
with positive torque. Based on the current motor speed the internal speed limit value
is also led to the setpoint via a ramp generator after enable.
r If the specified speed limit value directly corresponds to the line speed, the internal
limit value can be increased by entering an offset in C03008.
r The speed limit value in negative direction of rotation equals, according to amount, the
limit value for the positive direction of rotation.
r If the speed of the drive is inside the limitations, the motor generates the specified
torque.
r If the positive or negative speed limit value (for CW or CCW rotation) is reached, the
drive changes to the speed-controlled operation. The set speed limit values are not
exceeded.
Basic drive functions
r A quick stop can be activated via the digital input DI1.
Quick stop
(C 279)
r A manual control is provided for the setting-up operation. It is enabled via the digital
input DI6. The inputs DI7 and DI8 activate parameterisable setpoints for both
directions of rotation. Manual jog
(C 278)
r The basic function "limiter" enables the travel range to be monitored via limit switches.
Limiter
(C 258)
r When a brake is available the brake control opens and closes the brake. Brake control
(C 281)
See also: Basic drive functions (C 140)
Vue de la page 264
1 2 ... 260 261 262 263 264 265 266 267 268 269 270 ... 678 679

Commentaires sur ces manuels

Pas de commentaire

Brocade Communications Systems SilkWorm 3200 Handbücher

Bedienungsanleitungen und Benutzerhandbücher für Computerzubehör Brocade Communications Systems SilkWorm 3200.
Wir stellen 1 PDF-Handbücher Brocade Communications Systems SilkWorm 3200 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung






Weitere Produkte und Handbücher für Computerzubehör Brocade Communications Systems

Modelle Dokumententyp
Extension Switch 7800 Bedienungsanleitung   Brocade Communications Systems Extension Switch 7800 User Manual, 56 Seiten
Brocate Ethernet Access Switch 6910 Bedienungsanleitung   Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual [en] [de] [fr] [it] , 1200 Seiten
5300 Bedienungsanleitung   Brocade Communications Systems 5300 User Manual, 4 Seiten
Brocade ICX 6650 6650 Bedienungsanleitung   Brocade Communications Systems Brocade ICX 6650 6650 User Manual, 332 Seiten
Brocade VDX 6710-54 Bedienungsanleitung   Brocade Communications Systems Brocade VDX 6710-54 User Manual, 12 Seiten
Brocade VDX 8770-4 Bedienungsanleitung   Brocade Communications Systems Brocade VDX 8770-4 User Manual, 116 Seiten
SilkWorm 3800 Bedienungsanleitung   Brocade Communications Systems SilkWorm 3800 User Manual, 4 Seiten
Brocade VA-40FC Bedienungsanleitung   Brocade Communications Systems Brocade VA-40FC User Manual, 2 Seiten
Brocade 6910 Ethernet Access Switch 53-1002580-01 Bedienungsanleitung    Brocade Communications Systems Brocade 6910 Ethernet Access Switch 53-1002580-01 User Manual, 82 Seiten