Lenze CANopen Controller-based Automation Manuel d'utilisateur télécharger pdf (Page 39)

8 Commissioning of the CANopen Logic bus

8.4 Commissioning the field devices

Lenze · Controller-based Automation · CANopen® Communication Manual · DMS 6.3 EN · 04/2014 · TD17

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

8.4 Commissioning the field devices

Parameterise the Lenze field devices connected to the CANopen network by means of the

»Engineer« or »EASY Starter«.

CANopen is exclusively configured by means of the »PLC Designer«.

CANopen settings of the field devices which have possibly been carried out with the »Engineer«/

»EASY Starter« are overwritten.

 Tip!

We recommend to commission each field device individually and then integrate them into

the PLC program.

There already exist sample projects (device application + PLC program) for commissioning

of Lenze Controllers.

Sample projects (Application Samples)

( 36)

 Documentation of the Lenze field devices

Detailed information about the commissioning of the Lenze field devices is provided

here.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 109 110

Pas de commentaire

Lenze CANopen Controller-based Automation Manuel d'utilisateur Page 39