Lenze ApplicationTemplate PackML (PLC Designer R3-x) Manuel d'utilisateur télécharger pdf (Page 50)

Working with the ApplicationTemplate PackML

Inserting an axis

Lenze · ApplicationTemplate PackML · 1.0 EN - 05/2014

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

4. Assign the name of the instance (example: MM_Dcl.Module2.App1) to the module

application:

5. Assign the axis to the module application. The precondition for this is that the actual

machine structure is mapped in the »PLC Designer« project. Mapping the actual machine

structure: Add devices ( 38)

(The dwTestCounter input does not receive a transfer variable.)

• Select the desired axis (example: SM_Drive_ETC_9400HL)

•Click OK to insert the axis.

• The axis is connected to the machine module:

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 98 99

Pas de commentaire

Lenze ApplicationTemplate PackML (PLC Designer R3-x) Manuel d'utilisateur Page 50