Lenze 8400 Manuel d'utilisateur télécharger pdf (Page 50)

Technical data

Rated data

Operation at a rated mains voltage of 500 V



EDS84ASC552 EN 9.1

Switching frequency-dependent output currents

Output currents [A] at switching frequency

2kHz 4kHz 8kHz 16 kHz

Type I

arated2

aM2

arated4

aM4

arated8

aM8

arated16

aM16

E84AVxxx3714 1.0 2.6 1.0 2.6 1.0 2.4 0.7 1.7

E84AVxxx5514 1.4 3.6 1.4 3.6 1.4 3.3 0.9 2.3

E84AVxxx7514 1.9 4.8 1.9 4.8 1.9 4.4 1.3 3.1

E84AVxxx1124 2.6 6.4 2.6 6.4 2.6 5.9 1.7 4.1

E84AVxxx1524 3.1 7.8 3.1 7.2 3.1 7.2 2.1 5.0

E84AVxxx2224 4.5 11.2 4.5 11.2 4.5 10.4 3.0 7.2

E84AVxxx3024xxS 5.8 14.6 5.8 13.5 5.8 13.5 3.9 7.4

E84AVxxx3024xx0 5.8 14.6 5.8 13.5 5.8 13.5 3.9 7.4

E84AVxxx4024 7.6 19.0 7.6 17.6 7.6 13.4 5.1 7.3

E84AVxxx5524 10.4 26.0 10.4 24.1 10.4 15.2 6.9 9.0

E84AVxxx7524 13.2 33.0 13.2 30.5 13.2 20.6 8.8 12.7

E84AVxxx1134 18.8 47.0 18.8 43.5 18.8 25.6 12.5 16.2

E84AVxxx1534 25.6 64.0 25.6 49.0 25.6 33.6 17.1 20.8

E84AVxxx1834 34.0 78.0 34.0 78.0 34.0 61.2 23.0 41.1

E84AVxxx2234 40.0 89.3 40.0 89.3 40.0 63.7 27.0 41.5

E84AVxxx3034 52.0 112.1 52.0 89.3 52.0 63.7 35.0 44.4

E84AVxxx3734 65.0 136.8 65.0 97.6 65.0 82.1 43.0 60.4

E84AVxxx4534 77.0 169.1 77.0 124.4 77.0 101.5 51.0 70.8

aNx

Rated value of continuous output current

aMx

Maximum output current (overload current)

 Periodic load change of 3 s with I

aMx

and recovery time of 12 s according to

the tables under chapter  4.4

 Can be obtained in the setting ”x kHz fixed/...” in C00018

Switching

frequency

If the maximum heatsink temperature is reached, the switching frequency is

reduced to 4 kHz.

In the setting ”x kHz var./...” in C00018 the switching frequency is reduced

depending on the output current.

Depending on the switching frequency and e.g. the ambient temperature, it

may be required to reduce the output current (chapter 4.1, operating

conditions).

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 303 304

Commentaires sur ces manuels

Pas de commentaire

Lenze 8400 Manuel d'utilisateur Page 50

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Lenze 8400