Lenze DSD Manuel d'utilisateur télécharger pdf (Page 86)

100

101

7Applications

7.4 Omega belt drive

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Consideration of the radial and axial forces on the bearings in the gearbox and motor

In addition to the torques to be transmitted, considering the radial and axial forces on the rotor is

also important for the selection of the gearbox and motor.

[7-25] Radial and axial forces

• The radial force on the motor/gearbox output shaft can increase up to double the pretension

prl,Blt

of the toothed belt.

•The pretension F

prl,Blt

depends on the circumferential force F

Blt

≈ F

to be transmitted and the

required positioning accuracy, and on the permissible belt force.

•The pretension F

prl,Blt

usually is 1 ... 1.2 × F

Blt

, in individual cases up to 2 × F

Blt

. This has to be tak-

en into consideration when the motor or gearbox is selected.

• If required, a transmission gear is to be used (see arrangement B).

 Note!

This calculation currently cannot be carried out by the DSD.

Axial forces occur if the belt pulley is not in alignment. Avoid a belt pulley that is not in

alignment!

For these applications the axial forces can normally be disregarded.

 Toothed belt



rad

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 495 496

Commentaires sur ces manuels

Pas de commentaire

Lenze DSD Manuel d'utilisateur Page 86

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Lenze DSD

Verwandte Produkte und Handbücher für Nein LG GR-T452ZV