Lenze Drive Server Bus server S7 getting started Manuel d'utilisateur télécharger pdf (Page 14)

Busserv er S7

75Busserver S7 DE/EN 1.0

4.2 Bus server configuration

The “S7 c onfiguration tool” program is used for the configuration o f the bus server. Upon configuration,

the PLC and the drives configured in the respective PLC program are selected:

1. Select Programs

WLenzeWDriveServerWS7 configuration tool.

2. Confirm the Lenze OPC S7 Server info dialog box with OK.

– The configuration saved last will be loaded automatically.

– If you want to create a new configuration, select File

WNew.

4.2.1 User interface of the S7 configuration tool

The S7 configuration tool is subdivided into two sections:

• The left side indicates the configuration entries in form of a tree, similar to the directories of

the Microsoft Explorer.

• The right side shows all Settings for the configuration entry selected from the tree.

If you create a new configuration, the first visible entry will be “S7”:

Show/Hide Bookmarks

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 62 63

Pas de commentaire

Lenze Drive Server Bus server S7 getting started Manuel d'utilisateur Page 14