Lenze Function library LenzeIO1000Drv Manuel d'utilisateur télécharger pdf (Page 39)

DMS 1.0 EN - 07/2011 - TD05 L 39

Function library "LenzeIo1000Drv"

Function blocks

L_io1000ParRestore - Load default setting in I/O system

Sequence

For accepting the reset communication setting, the NMT command "Reset Node" is sent to

the I/O system. The I/O system re-initialises and returns a boot-up telegram as soon as it is

in the "Pre-Operational" status again. Only if the FB receives this boot-up telegram, loading

of the default setting is completed.

 Note!

After sending the NMT command "Reset Node" to the I/O system, the FB has to

receive the boot-up telegram within 10 s, otherwise a timeout error will be

output at the dnState output.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 63 64

Pas de commentaire

Lenze Function library LenzeIO1000Drv Manuel d'utilisateur Page 39