Lenze EVS9332xP Manuel d'utilisateur télécharger pdf (Page 64)

100

101

Installing of the standard device

Standard devices with a power of 45 kW

Modification of the fan module for push−through technique

4.3

4.3.4



4.3−4

EDSVS9332P EN 5.0−07/2013

4.3.4 Modification of the fan module for push−through technique

For thermally separated mounting the fan module has to be rotated by 180°

so that the controller fits into the mounting cutout.

9300vec170

Fig. 4.3−3 Removing the fan module from the controller

1. Remove both screws.

The screws connect the fans to the supply voltage.

2. Remove the 4 screws for fixing the fan module on each side.

3. Pull back the fan module and carefully remove it to the top.

Make sure that the threaded sleeves do not touch the housing edge. They

may break off.

9300vec171

Fig. 4.3−4 Modifying the threaded sleeves for the voltage supply of the fans

1. Remove the threaded sleeves.

2. Screw−in the threaded sleeves on the opposite side and fasten them.

Removing the fan module

Modifying the threaded

sleeves on the fan module

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 444 445

Commentaires sur ces manuels

Pas de commentaire

Lenze EVS9332xP Manuel d'utilisateur Page 64

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Lenze EVS9332xP