Lenze GDC easy getting started Manuel d'utilisateur télécharger pdf (Page 64)

Global Drive Control easy

62 GDC easy DE/EN 2.0

5.1.3 Find OPC drives

Once GDC has been configured as an OPC client, you can search online to find the drives connected

to the OPC bus server:

1. If GDC is still in offline mode, click OptionsWOnline or press function key <F4> to change to

online mode.

2. Go to ControllerWSearch... or press function key <F2>, to open the dialog box Find OPC

drives :

3. Click the button Search to start searching or click Cancel to abort.

– Once the search is completed the controllers found are listed in the window "Drives

connected to bus".

Note!

· GDC automatically tries to allocate device descriptions to the drive controllers found.

– If only one drive was found and a device description could be allocated, the device

description is loaded immediately.

– If automatic allocation of the device description for a drive fails, the device description for

the drive can be allocated manually.

Select the corresponding controller in the window "Drives connected to bus" or click

ControllerWSelect... to open the dialog for manual allocation.

· Use the command ControllerWCommunication parameters... to display the OPC access path

(e.g. COM1.Device_01) in text field Access path of the dialog box Current drive.

1 2 ... 59 60 61 62 63 64 65 66 67 68

Pas de commentaire

Lenze GDC easy getting started Manuel d'utilisateur Page 64