Lenze GDC easy getting started Manuel d'utilisateur télécharger pdf (Page 45)

Global Drive Control easy

43GDC easy DE/EN 2.0

Window "Drives connected to bus"

All target systems found on or allocated to the target system including available AIF/FIF modules are

listed in the window Drives connected to bus.

· If the window should not appear select WindowWDrives connected to bus to show the

window.

Fig. 8 Window Drives connected to bus

Doubleclick the target system which you want to parameterize with GDC.

· The corresponding device description file will be loaded into GDC and the dialog for short

commissioning or the parameter window will be displayed.

– More information on the dialog for short commissioning can be found in section 4.7. (^ 48)

– More information on the parameter window can be found in section 4.8.6. (^ 54)

Tip!

If you click an entry with the right mousebutton a context menu with a command for manual allocation

of the device description file will appear.

With the context menu command:

· Manipulate basic controller you call the dialog box Assign device description to the basic

controller. (^ 44)

· Manipulate AIF you call the dialog box Assign AIF module to the basic controller . (^ 45)

· Manipulate FIF you call the dialog box Assign FIF module(s) to the basic controller . (^ 47)

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 67 68

Pas de commentaire

Lenze GDC easy getting started Manuel d'utilisateur Page 45