Lenze GDC easy getting started Manuel d'utilisateur télécharger pdf (Page 57)

Global Drive Control easy

55GDC easy DE/EN 2.0

Selecting parameters

You can select a target system parameter shown on the right−hand side in the parameter window using

the right mousebutton or the arrow keys.

· The selected parameter is highlighted by a yellow background.

· By pressing the function key F1 you open the online help with information on the selected

parameter.

Changing parameters

You change a selected parameter through an input dialog which you open by pressing the Enter key.

Tip!

Use the left mousebutton to simultaneously a select parameter and open the input dialog to change

the parameter.

More information on the input dialogs can be found in the following section. (^ 56)

Codes/Objects

Parameters either have codes or objects:

· Codes are marked by a "C" in the column "Code" and represent the known Lenze codes.

· Objects are marked by a preceeding "I" in the column "Code" and represent parameters with a

hexadecimal address.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 67 68

Pas de commentaire

Lenze GDC easy getting started Manuel d'utilisateur Page 57