Lenze E94P PositionServo with MVOB Manuel d'utilisateur télécharger pdf (Page 42)

40 L S94H201E_13426446_EN

Parameters

5.2 Motor

The motor folder displays the data for the currently selected motor. A motor may be selected from the

database or a custom motor may be conﬁgured.

5.2.1 Motor Setup

Select the [Motor] folder in the right-hand “Parameter View Window”. To select a new motor click the

[Change Motor] button. When [Change Motor] is selected, the Motor Database dialog box will open. Select

the Motor Type from the node tree in the left-hand window.

NOTE: The drive must be is DISABLED (display: “diS”) to setup a new motor.

To make a new motor selection:

• Click [Change Motor] in the Parameter View Window.

• Select motor Vendor and Motor Model from the pull down menus.

• Click [Update Drive] to complete the motor selection, dismiss the dialog box and return to MotionView

OnBoard’s main program.

• If using a motor not listed in the current motor database, select [Create Custom] and refer to section

5.2.2 “Using a Custom Motor”.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 101 102

Pas de commentaire

Lenze E94P PositionServo with MVOB Manuel d'utilisateur Page 42