Lenze Cam Designer Professional getting started Manuel d'utilisateur télécharger pdf (Page 74)

Cam Designer Professional

72 Cam Designer Professional DE/EN 2.0

7.2 Entry of technological requirements

See chapter 5.2, “Object Input Mode”. (¶64)

1. If Cam Designer is not in Object Input Mode (level 1), select View➞

➞➞

➞Object Input Mode to

change to this mode.

2. Create the graphical elements required under menu Draw.

Tip!

Please observe the following when specifying the boundary conditions:

• Do not specify more conditions than necessary.

• The length of stop positions should be limited to it s minimum.

• The higher the degree of freedom for Cam Designer in automatic generation, the smoother the

resulting profiles. If necessary, line segments will be added to the polynomials.

• We recommend to start the automatic generation of connections with the minimum number of

conditions and add more conditions later, if necessary.

7.3 Join segments

See chapter 5.3, “Curve Mode”. (¶65)

1. Select View➞

➞➞

➞Curve Mode to change to Curve Mode.

2. Select Edit

➞

➞➞

➞Start Calculation... to automatically connect the graphical elements created in

Object Input Mode.

Tip!

• Go to the Settings dialog box, select Edit➞

➞➞

➞Project Settings... and click the Connections tab

to select the connection type.

• The value range for velocity and acceleration can be shown as normalised or physical values.

( Ed it

➞

➞➞

➞Project Settings..., Machine tab)

Show/Hide Bookmarks

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 82 83

Pas de commentaire

Lenze Cam Designer Professional getting started Manuel d'utilisateur Page 74