Lenze PLC Designer Migration PLC Designer (R2-x)-PLC Des Manuel d'utilisateur télécharger pdf (Page 19)

Lenze · PLC Designer | Migration of V2.x projects · 1.2 EN - 02/2013 19

Update of a project from V2.x to V3.x

Import of the example project into the »PLC Designer« V3.x

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

7.2 Import of the example project into the »PLC Designer« V3.x

 How to import a V2 project into the »PLC Designer« V3.x:

1. Start»PLC Designer« V3.x.

2. Open the »PLC Designer« V2 project (FileOpen project):

• Select file extension *.pro (CoDeSys projects (before V3.0).

3. Convert devices

• Replace the target system set in the V2 project by a corresponding V3 target system.

Note: You have the option to save the assignment for future projects: Activate the control

field  to replace the target system automatically by this V2 target system during the next

project import.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 29 30

Pas de commentaire

Lenze PLC Designer Migration PLC Designer (R2-x)-PLC Des Manuel d'utilisateur Page 19