Lenze GDC with OPC Manuel d'utilisateur télécharger pdf (Page 5)

Global Drive Control with OPC

General information

 GDCmitOPCEN1.0

2 Configuring GDC as an OPC client

Tip!

Before configuring GDC as an OPC client, the appropriate bus server must be configured so that

it is available for selection in GDC.

• For details about configuring the bus server, please refer to the bus server documentation.

To enable GDC to communicate with the DriveServer via the OPC interface, the GDC

communication parameters have to be configured accordingly:

1. Select OptionsWCommunication... to open the dialog box Select communication driver:

– All communication drivers available are displayed in the list box.

2. Select the entry OPC in the list box and click the button Parameter... to open the dialog box

OPC :

3. Enter the name of the computer on which the bus server is installed in the input field

Computer name .

– Click the button Network to select the corresponding computer from your network

environment.

– If the bus server is installed on the same computer as GDC, you can simply leave the input

field Computer name blank.

Show/Hide Bookmarks

1 2 3 4 5 6 7 8

Pas de commentaire

Lenze GDC with OPC Manuel d'utilisateur Page 5