Lenze GDC GDC getting started Manuel d'utilisateur télécharger pdf (Page 43)

Global Drive Control

41GDC DE/EN 4.0

4 First steps with Global Drive Control

4.1 General

The program GDC distinguishes between online and offline mode.

· Offline:

No connection with the target system. This mode is useful for preparatory parameterization in

the office or for documentation purposes. No components but a PC are required.

· Online:

GDC communicates via the serial/paramellel PC port or via a fieldbus−specific PC connection

module with the target system. This mode is required for the commissioning of the target

system.

Note

The GDC default setting is serial port COM2 and system bus (CAN) port (500kBaud/parameter

channel 2) when "system bus (CAN) connection" has been selected for installation.

· If you want to use another port you have to configure it in the GDC communication settings.

(Refer also to the tip on the next page.)

· Further information on target system communication can be obtained from the GDC online

help.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 70 71

Pas de commentaire

Lenze GDC GDC getting started Manuel d'utilisateur Page 43