Lenze GDC GDC getting started Manuel d'utilisateur télécharger pdf (Page 66)

Global Drive Control

64 GDC DE/EN 4.0

5 Appendix

5.1 Using GDC as OPC client

GDC has an integrated interface for OPC (OLE for Process Control) and can thus access − as OPC client

− to bus servers supported by Lenze DriveServer.

5.1.1 Bus server configuration

Before configuring GDC as an OPC client, the appropriate bus server must be configured so that it is

available for selection in GDC.

· For details about configuring the bus server, please refer to the bus server documentation.

Tip!

· The DriveServer delivery package includes bus servers for the fieldbus systems LECOM and

system bus (CAN). A bus server for the MPI bus (bus server S7−MPI) is also available from

Lenze. (^ 67)

· For an overview of the bus servers supplied by Lenze and third−party manufacturers, please

refer to the DriveServer – Accessories" documentation.

5.1.2 Configuring GDC communication parameters

To enable GDC to communicate with the DriveServer via the OPC interface, the GDC communication

parameters have to be configured accordingly:

1. Go to OptionsWCommunication..., to open the dialog box Select communication driver :

– All communication drivers available are displayed in the list field.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71

Pas de commentaire

Lenze GDC GDC getting started Manuel d'utilisateur Page 66