Lenze ECSEAxxx Manuel d'utilisateur télécharger pdf (Page 90)

Mechanical installation

Important notes

4



90

EDKCSEX064 DE/EN/FR 6.0

4 Mechanical installation

4.1 Important notes

ƒ Axis modules of the ECS series provide IP20 enclosure and can therefore

only be used for installation in control cabinets.

ƒ If the cooling air contains air pollutants (dust, fluff, grease, aggressive

gases):

– Take suitable preventive measures , e.g. separate air duct, installation

of filters, regular cleaning.

ƒ Possible mounting positions:

– Vertical at the mounting plate

– DC bus connections (X23) at the top

– Motor connection (X24) at the bottom

ƒ Maintain the specified clearances (above and below) to other

installations!

– If the ECSZS000X0B shield mounting kit is used, an additional clearance

is required.

– Ensure unimpeded ventilation of cooling air and outlet of exhaust air.

– Several modules of the ECS series can be installed in the control cabinet

next to each other without any clearance.

ƒ The mounting plate of the control cabinet

– must be electrically conductive.

– must not be varnished.

ƒ In case of continuous vibrations or shocks use shock absorbers.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 199 200

Commentaires sur ces manuels

Pas de commentaire