Lenze HMI for visualisation / with control technology Manuel d'utilisateur télécharger pdf (Page 44)

Commissioning

Installing fonts



LDCDS−EL100 EN 9.0

7.7 Installing fonts

If you want to use additional fonts, for instance containing Asian characters, on the EL 1xx,

you can implement them by means of the "AddFont.exe" tool.

 Note!

Please observe the size of the font files, in particular for Asian fonts. To begin

with, check whether the files still fit into the internal flash memory of the

EL 1xx or if they have to be swapped out to an SD/SDHC card.

How to proceed:

1. Depending on the memory location, create the following directory for the additional

fonts:

Internal flash memory: \Flashdisk\Fonts

SD/SDHC card: \Storage\Fonts

2. Copy the "Addfont.exe" file from the "L−force PC−based Automation" DVD to this

directory.

3. Also copy the font files to this directory.

4. Extend the "\Flashdisk\Autostart.txt" file according to the following example:

;=============================================================

; use API addfont in Flashdisk\Fonts!!!!!

; Example: ;\Storage\Fonts\AddFont.exe Storage\Fonts\

;==============================================================

\Flashdisk\Fonts\AddFont.exe Flashdisk\Fonts\

5. Save the "Autostart.txt" file.

6. Restart the EL 1xx.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 95 96

Pas de commentaire

Lenze HMI for visualisation / with control technology Manuel d'utilisateur Page 44