Lenze Global Drive Control (GDC) Manuel d'utilisateur télécharger pdf (Page 11)

1.1 EN - 10/2010 L 11

Global Drive Control | L-force Controller as Gateway

Controller as gateway

Controller as gateway via CAN

4.2 Controller as gateway via CAN

4.2.1 Setting the communication path

 Tip!

Before working on the communication parameters, switch to the offline mode. To

activate the offline mode, press the F4 button:

To use the L-force Controller as gateway, you must select the suitable communication dri-

ver: Options

 Communication.

4.2.2 Selecting the communication driver

Select Controller Gateway -> CAN from the list of drivers available:

 Access the Gateway -> CAN dialog window via the Parameter button.

– Set communication parameters:

 To set the communication parameters, you must enter the following configuration da-

ta:

Information Function

IP address IP address of the L-force Controller which serves as gateway for communica-

tion

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Pas de commentaire

Lenze Global Drive Control (GDC) Manuel d'utilisateur Page 11