Lenze Backup & Restore Data saving and restoring Manuel d'utilisateur télécharger pdf (Page 29)

Lenze · Backup & Restore · Software Manual · DMS 1.3 EN · 04/2014 · TD17 29

4 Creating a backup & carrying out recovery

4.2 Carrying out restore and auto-restore

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

10. Restart controller (with connected USB stick) by mains switching.

• Contollers in Windows CE systems are automatically restarted.

• The backup selected is restored.

11. After the boot-up of the controller: Remove the USB stick from the controller.

4.2.2 Carrying out a restore: directly on the controller

[4-4] Illustration example: »Backup & Restore« under Windows CE ()

 How to carry out a restore:

1. Connect a USB stick to the USB interface of the controller.

2. Start the »Backup & Restore« application.

3. Open the Restore/Update tab.

4. Select the Restore action

5. Available backups are shown.

6. Select a backup.

Further information: Components of the backup designation

( 22)

7. Press Start.

A control file is written to the USB stick.

8. Restart controller (with connected USB stick) by mains switching.

• Contollers in Windows CE systems are automatically restarted.

• The backup selected is restored.

9. After the boot-up of the controller: Remove the USB stick from the controller.

 Note!

Cabinet controllers with a DVI interface require an external Monitor Panel.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 42 43

Pas de commentaire

Lenze Backup & Restore Data saving and restoring Manuel d'utilisateur Page 29