Lenze MC-CAN2 Manuel d'utilisateur télécharger pdf (Page 30)

5 Electrical installation

LDCDS−MC−CAN2 DE/EN 3.0



H1_E_INST−Hin_Treiber−Install

Specification of the transmission cable

We recommend the use of CAN cables in accordance with ISO 11898−2:

CAN cable in accordance with ISO 11898−2

Cable type Paired with shielding

Impedance

120 W (95 ... 140 W)

Cable resistance/cross−section

Cable length £ 300 m £ 70 mW/m / 0.25  0.34 mm

(AWG22)

Cable length 301  1000 m

£ 40 mW/m / 0.5 mm

(AWG20)

Signal propagation delay

£ 5 ns/m

 Note!

For commissioning the unit, the corresponding driver has to be installed on the

Industrial PC. It can be found on the DVD from the scope of supply of the

standard device ("PC−based automation" or "Controller−based automation").

1 2 ... 25 26 27 28 29 30 31 32

Pas de commentaire

Lenze MC-CAN2 Manuel d'utilisateur Page 30