Lenze EMF2191IB Manuel d'utilisateur télécharger pdf (Page 32)

6 Electrical installation

POWERLINK connection

EDK2191DB DE/EN/FR 2.0



H2_PowerlinkAnschluss−Merker_hidden_kabelspez

POWERLINK connection

You can use a standard Ethernet patch cable for connecting the communication module to

the fieldbus (see "Ethernet cable specifications" (33)).

 Note!

Plug/remove the Ethernet cable plug in a straight manner (at right angles)

into/from the socket to make sure that the RJ45 socket will not be damaged.

Pin assignment

RJ45 socket PIN Signal

1 Tx +

2 Tx −

3 Rx +

4 −

5 −

6 Rx −

7 −

E94AYCXX004C

8 −

 Tip!

The POWERLINK interfaces feature an auto MDIX function. This function

adjusts the polarity of the RJ45 interfaces so that a connection is established

irrespective of the polarity of the opposite POWERLINK interface, and

irrespective of the type of cable used (standard patch cable or crossover cable).

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 57 58

Pas de commentaire

Lenze EMF2191IB Manuel d'utilisateur Page 32