Lenze CS 9000 DVI Operating Instructions Manuel d'utilisateur télécharger pdf (Page 28)

Mechanical installation

Mounting steps

Fixing the mounting frame to the support arm



BA_CS9000DVI EN 4.0

5.2.2 Fixing the mounting frame to the support arm

 Note!

Before mounting:

ƒ Remove mounting frame ( 27).

ƒ Read documentation of the accessories.

ƒ Check whether the mounting location corresponds to the operating

conditions described in the "Technical data"; if required, take additional

measures.

Without add−on component







CS57x0−005

How to proceed:

1. Check support arm system for professional mounting and sufficient carrying

capacity.

– See support arm documentation.

2. Stick the self−adhesive seal  on the adapter plate  on the side with the threaded

bolts.

3. Pull the connecting cables  out of the support arm  and screw the adapter plate 

to the support arm .

– For screws see support arm documentation.

4. Screw the mounting frame  to the adapter plate .

– 4 nuts M5 with washers Æ 5.3 mm

Now you can connect the Command Station ( 33).

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 52 53

Pas de commentaire

Lenze CS 9000 DVI Operating Instructions Manuel d'utilisateur Page 28