Lenze CANopen control technology Manuel d'utilisateur Page 93

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 105
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 92
DMS 4.2 EN 07/2011 TD17 L 93
Control technology | CANopen communication manual
Diagnostics
Error messages if communication card MC-CAN2 is not available
13.3 Error messages if communication card MC-CAN2 is not available
If no communication card MC-CAN2 has been inserted into the industrial PC, error mes-
sages occur during the download of the »PLC Designer« project.
Remedy: Insert the communication card MC-CAN2 into the industrial PC.
13.4 Searching the CANopen bus for nodes using the Engineering PC
1. First directly connect your notebook via the USB system bus adapter EMF2177IB to
the CANopen bus.
2. Start the program »System bus configurator«:
in the »Engineer« in the menu bar under "Online"
or under "Start - Programs - Lenze - Communication"
3. Activate the USB system bus adapter (EMF2177IB).
4. Check the following under the "Settings" tab:
baud rate = as on the devices
parameter data channel = 0:
The entire address range is scanned. Devices responding on several SDO
channels are displayed with several node addresses.
Example:
5. Click the Communication diagnostics button on the Common tab to start the
search.
Vue de la page 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 104 105

Commentaires sur ces manuels

Pas de commentaire